Announcement

Collapse
No announcement yet.

Burlington Northern Over Marias Pass

Collapse
X
Collapse
  •  

  • Burlington Northern Over Marias Pass


    Burlington Northern Over Marias Pass


    By Curt May (12 June 2003)







    First off I would like to apologize to Nels and 3D Train Stuff for
    taking so long, but I had family matters to attend to. I would like to
    take a minute to say hello to all of you and to let you know a little
    about me. Nels and I go back a few days on the FlightSim.Com side. I
    did reviews and aircraft design over there since about the day the
    site opened. Sometimes when I call him I make the comment about how
    quiet it used to be and how he could get a days uploads done in a few
    minutes that now take the better part of a day.



    I grew up in the Midwest with the likes of CNW, BN, SOO, Milwaukee
    Road, ICG and CN all passing through town. I was a tick over a half
    an hour from one of Milwaukee Road's major yards and ten minutes from
    one of Chicago Northwestern's main car and engine shops and yard. Many
    a night I heard the deafing clang of a wheel being taken off its
    axle.



    Anyway a long while back when MSTS came out ol' Nels was on to it
    right away. I remember the morning I called him up and he had it
    running when he answered the phone and the first thing I heard was
    the sound of a diesel locomotive and its horn. I asked him what the
    hey it was and he told me all about it and said I should get it and
    that I would like it. I told him thanks but no thanks, I already had
    a full plate of aircraft and enjoyed cruising at altitudes so high
    that the tracks weren't even visible and at speeds that left even the
    French TGV in the dust...so to speak. Well every now and then I would
    give Nels a call and chew the rag a little and he would make the
    comment about MSTS and that I would like it and that I should get it
    and I would tell him maybe some day. Well a while back that someday
    arrived and Nels was right about cruisin' the countryside on rails,
    although I still head for the blue now and then just to stay current.
    I now have MSTS and have been steadily downloading some of the best
    locomotives and cars one could ask for from here at the site, keep up
    the great work all you freeware builders, you're doing outstanding
    work.






    I think it was about a month ago I told Nels that if he needed a
    review done or a product tested to give me a shout and I would give
    it a go. It wasn't a day until I was asked to give 3D TRain Stuffs
    "Burlington Northern over Maria Pass" a once over thoroughly. So
    after a tough month here I am and it is.



    Now from what I can tell 3D Train Stuff does quite a bit of building
    and from the looks of their web site screen shots it looks like
    quality stuff so I got ahold of a copy and went about installing
    it, which is dummy proof. All you have to do is click on the .exe file
    and away ya go. After you get it installed you will find that you now
    have four GP20's and some fresh rolling stock in Rail Box, GT and Penn
    livery. The activities use either the fresh rolling stock or the
    default rolling stock to make the consist. The level of detail on the
    locomotives is very good as illustrated here in the screen shot.






    While 3D Train Stuff did a very good job on the level of detail, in
    the animation department they left out the rotating roof fans, which
    to me is a gotta have when you take a look around on the outside.
    This is a personal preference of mine since if you look at a real
    locomotive that is under a heavy load on a hot summer day the roof
    fans will definately be a spinnin'. That is my only disappointment on
    the eye candy and other than that the eye candy is sweet. The cab is
    another piece of eye candy that has been done really well. You will
    need to run it at the maximum resoulution that your computer can
    handle without shrinking the screen size down to the size of a
    postage stamp as possible to really appreciate it what they have
    done. The view down the tracks is very good and even though it is
    quite detailed I didn't notice any drop in frame rates. All the
    levers are animated and move smoothly. At lower resolutions the
    gauges become a little hard to read, but, with the handy track monitor
    that you can pop up just to double check to make sure you should not
    have any problems.



    The activities that come with it are a nice balance of easy to being
    a real challenge to engineers of all levels. The only problem that I
    had was with the grain consist out of Shelby to Cutbank and what it
    amounted to was not enough muscle on the nose. Using the activity
    editor to add another unit made all the difference.






    The lumber activity is dandy to the uninitiated in the fact that some
    would look at the train and think that because it isn't loaded box
    cars or a coal drag that it is going to be a snap to get moving and
    keep moving. On the contrary, the guys over at 3D Train Stuff have
    this one set right at the limits and you really have to pay attention
    to the gauges and the sound of the engine to accomplish the
    activity.



    As you can see here the log train in the Shelby yard looks right at
    home. I tried the different consist out first in the explore route
    mode to just get a "feel" for the load and to get in touch with the
    way the locomotives are set up and to say the least they are very
    good in both "feel" and predictability. It is easy to keep a load
    under control with these engines, which was surprising because usually
    what I have found with some of the freeware older smaller locomotives
    is that even with a short shuttle behind me and being under the safe
    limit for the locos I sometimes find myself fighting the locomotive
    and the consist going down a hill or a mountain and I have had a
    couple get away from me and the last thing I saw out the windshield
    was the curve in the track that I should be headed on going by the
    side window heading away from me and a rock wall or a large gulch
    heading at me at a very high rate of acceleration with the usual
    ending of the entire train all in one place in a nice haphazard pile
    and the "train derailed activity ended".






    The lighting is very realistic and shows the talent of the folks over
    at 3D Train Stuff. Now I know that everybody who builds either a
    locomotive or a box car always tries to do the best that they can and
    sometimes ya just miss something by just a tad. My other
    disappointment was the locomotive engine sound and the horn. I had
    the misses come in and take a listen just to make sure it wasn't my
    ears playing tricks on me (too much jet noise from flying MSFS) and she
    said the same thing. To her it, as she put it "sounded more like a
    diesel truck instead of a locomotive". I have to say the same
    thing, although to make it better and more realistic the sound folks
    over at 3D want to "re-mix" it and add a little bit more of the deep
    sounds (I guess that's one way to put it) to give the locomotive
    sounds more depth. The air compressor sounds and the pressure relief
    valve sounds are a hit and are very realistic and add to the entire
    package. The horn is another item that needs a little attention. I
    know the sound that they are after as I have heard it so many times I
    can hear it in my mind and don't get me wrong, they are very close to
    the sound they are after, they're just not there...yet. The horn
    needs depth...that's the only way I know how to put it.



    It sounds like a horn that is being sounded through a tiny tweeter
    speaker mounted in a tin can at 50 yards instead of the ear
    shattering heart stopping right on top of you get out of the way
    sounding horns that the real GP20's in real life have and that some
    of the freeware horns have. Where is Mike Hambly when ya need him?






    Out of the entire add-on those things that I mentioned were the only
    things that I found that in my personal opinion didn't quite measure
    up to what most of us have come to expect from 3D Train Stuff. Other
    than that, I found the add-on to be very good and a good challenge and
    worth the dinero (money). So all you Burlington Northern fans of the
    BN green or GP20 fans or those of you who just gotta have something
    small to take care of the yard with or to get those shuttles over to
    the next town then this is most definately worth the price and a
    gotta have for you.



    For the folks over at 3D Train Stuff, with the exceptions mentioned
    you have again done an outstanding job in the art of locomotive
    building and activity packages and my thanks to Nels and 3D train
    Stuff for allowing me to review it.



    Curt May

    muttly55@hotmail.com




    Visit
    3D Train Stuff.

      Posting comments is disabled.

    article_tags

    Collapse

    Latest Articles

    Collapse

    • Review: World Of Subways Vol. 4
      by Nels_Anderson

      Subway Simulator Line 7 Publisher: Aerosoft Review Author:Justin Cogo Suggested Price:$37.99 World of Subways Volume 4: New York Line 7 Introduction Welcome to the primary metropolitan transportation choice for New Yorker's besides walking, the subway! I am Justin Cogo and I am pleased to be reviewing World of Subways Volume 4 - Line 7! My experience with simulators is mainly flight simulators with a good amount of train simulator experience as well. ...
      Posted 12-23-2015, 05:32 PM
    • TrainMaster 4
      by eric

      TrainMaster Review Note: Click on any screen shot for a full size view. Winter Park, on the Moffat Subdivision, lives up to its name. Introduction I suspect that many people have looked at vehicles and wondered what it would be like to be the person at the controls. Could I fly that plane? What's it like to be sailing that giant ship? Or, since it's the current topic, what's it like to run a train? Trains are perhaps the most intriguing since they offer the least po...
      Posted 09-28-2012, 11:08 AM
    • World Of Subways Volume 1 The PATH
      by eric

      Review: World of Subways, Volume 1, "The PATH" By D.C. Shoemaker6 August 2010 This is part overview and part help for getting started with this unique game. Winner of the "2009 Serious Game Award," Aerosoft of Germany has now produced two subway simulations, the PATH and the Berlin U-7, and they are spectacular. Be aware that some quick-overview reviews imply or say outright that WoS is an add-on for Microsoft Train Simulator; this is not so, the simulator is completely stand-alone. I'm r...
      Posted 09-28-2012, 11:08 AM
    • Trainz First Impressions
      by eric

      Trainz First Impressions By Pete Higginbotham (22 December 2001) My name is Pete Higginbotham. I am a 51-year-old retiree from the San Francisco Bay Area now living in Southern California. I have been a train enthusiast for quite sometime and worked for a short while in a retail store, which specialized in H.O., and Lionel model trains. I have been involved in several, I believe, rather impressive model train layouts. I spent the afternoon downloading the “demo” version of ...
      Posted 09-28-2012, 11:08 AM
    • Trainz
      by eric

      Trainz By Matt Peddlesden and James Hunt (22 February 2002) With the final retail release of Aurans' Trainz is now either on store shelves or on its way to store shelves, it seems that the "virtual" railway enthusiast has another product to choose from. Not bad when you think only a year ago people who loved trains were feeling very left out by the P.C. gaming industry. Trainz was first released as an online purchase before Christmas at a cost of $49 US. Since then Strategy Fi...
      Posted 09-28-2012, 11:08 AM
    • TGV Train Sim Pack
      by eric

      TGV By Robert Jubb (17 May 2002) The first high-speed rail travel begin in Japan with the original Bullet train. From there, train travel between major cities could begin to compete with short haul air travel. SNCF (Societe Nationale des Chemins de Fer francais) was the first European rail network to bring high speed rail travel to the masses of France. It began in the early 1980's with the TGV Sud-Est, the first high speed railway line in France, running from the Gare de Ly...
      Posted 09-28-2012, 11:07 AM
    Working...
    X