SP Cab Forward - take 2

[philskene]

"When you say, " you absolutely must alias to a different cab " does that mean that it won't work with out a cab view?"

Roger that. The one you downloaded from RapidShare aliases to a cab that is built-in to TS12 but not in '10. You will need to replace the cab with one that is in TS10.

" ... my Trainz 12 is up and running now."

Well in that case the above is not all that relevant.

"I hope this is not offensive, it just takes a lot away from the cabforward experience to have a boiler in view from the front wildow."

It's OK to say that and it's not offensive. I agree, but I'm limited to what is available, and in this case there is no proper Cab Forward cab.

[CWA13000]

Thanks a bunch, Phil !

Willy --

"Will it work in TS10?"

Dunno for sure 'cause I don't have '10 installed.

I kinda think that it probably will - though you absolutely must alias to a different cab, for example, the UP 4-8-8-4 interior, kuid:523:55901. The cab I used is built-in to TS12 but not in TS10.

If it don't work the only other alteration it may require is to downgrade the trainz-build in the config.txt file.

Why not just try it. It can be downloaded here:

https://rapidshare.com/files/1125639234/US_Loco_SP_CabForward_AC-12__4294_RapidShare.zip

You may have to wait a few moments for a free download slot.

Phil

When you say, " you absolutely must alias to a different cab " does that mean that it won't work with out a cab view? The only thing I didn't like about the screens was the cab view. If I can figure how to alias, I think I would choose some trolley or rail car cab that had an unobstructed front view till someone makes a cab forward cab.

I hope this is not offensive, it just takes a lot away from the cabforward experience to have a boiler in view from the front wildow. I guess this is a small regret of mine for giving up on MSTS, cause I had a kool cabforward with a respectible cab view in that game.

Wild Willy the Wacko

P. S. Got that file in seconds! Also, my Trainz 12 is up and running now.

[philskene]

Willy --

"Will it work in TS10?"

Dunno for sure 'cause I don't have '10 installed.

I kinda think that it probably will - though you absolutely must alias to a different cab, for example, the UP 4-8-8-4 interior, kuid:523:55901. The cab I used is built-in to TS12 but not in TS10.

If it don't work the only other alteration it may require is to downgrade the trainz-build in the config.txt file.

Why not just try it. It can be downloaded here:

https://rapidshare.com/files/1125639234/US_Loco_SP_CabForward_AC-12__4294_RapidShare.zip

You may have to wait a few moments for a free download slot.

Phil

[CWA13000]

Hi, Phil, will this loco also work in Trainnz 2010 EE ? I have 12 but have not installed since I upgraded a machine in attempts to make it run better.

Thanks

Wild Willy the Wacko

[philskene]

And in action on the HarborMaster route - best viewed in full screen and HD:

https://www.youtube.com/watch?v=03OEoD2T3Sg