BNSF Seligman Route 2.0

[trainsimklaus]

My Information was:

The install is broken:

\tiles\-025d4850-y.raw

Error: 11FB

My Track-ID by SLI is: 1R8-JZ7-82N3

Thank you for the help.

Hans-Helmuth

[Curt C]

Hello Curt C,

the answer is very goood, but my support -info have SLI not answer.
I have given the precise mistake, but till this day have received no answer.
What you would do, if you on a bought think which has mistake, and you help needs, no answer receives.

Hans-Helmuth

Believe me, I understand the frustration, but again, what is the error message you're receiving?? I would also recommend posting your question on the SLI forum.

[trainsimklaus]

Hello Curt C,

the answer is very goood, but my support -info have SLI not answer.
I have given the precise mistake, but till this day have received no answer.
What you would do, if you on a bought think which has mistake, and you help needs, no answer receives.

Hans-Helmuth

[Curt C]

They're not the best at responding to emails. So what's the error message you're getting? Give some details here, and someone may be able to assist.

[trainsimklaus]

Good afternoon Train-Simmer,
to all friends of SLI.

My problem:
I had an error message of the BNSF-Seligman V2.0 in SLI three weeks ago sent,
but till this day still no answer, this is normal or ...

from sad trainsim-klaus from germany

[brissim]

Found some solutions to my problems (at least those relating to MSTS and running these activities). Taking some advise from the Streamlines forums I've reduced the Train Object Quality sliders from 3 to 2. This solves both the problems with both the Phoenix activity freezing up when and AI train approaches and (at least the start) of the Bad Day activities.

Tony

[Curt C]

I've only ran a little bit of the new bnsf route, but haven't noticed any scenery-updates. I'll have to pay close attention. I do like the updated signals, and thought that the addition of the sounds in the cabs, of when you're crossing over a switch, was nice.

[cbff33]

The signalling is up to date as the whole route is now ctc. That is the major change. Again....this is a whole separete route as seen by the name. The atsf and bnsf were two totally separate railroads. Bnsf seligman is the route as it sits today with appropriate additions to scenery

[brissim]

And I've just remembered that Steamlines have their own forums. Quickly checked, and yes it appears there are quite a few people having problems running the activities mentioned - although not exactly the problems I encountered. Comments from that forum indicate a possible solution is running under Open Rails. Not sure this is a proper solution. Not a good sign and not impressed.

Tony

[deagle]

Thanks for the activity information. Is there any difference in the route itself?

[brissim]

Got the upgrade package few days ago, nice stuff, works and looks okay, just a couple problems with 2 activities.SLI_bad day for trains 1 and 2, load up then freeze, any suggestions, and yes all is set correctly for windows 7 home 64 bit.

Thanks poochwilly

I'm having problems with all three activities I've tried to date.

With Harvest Heavyweight the overtaking manuvere at Peach Springs goes off with no problems, but then the train that overtakes yours gets stopped at the next absolute Stop. So far I've waited 15-20 minutes with nothing happening and my train closed up to the AI train. Maybe I've got to wait longer.

With Headin' to Phoenix, all goes well until I'm just west of the Navajo sidings and the compter just freezes.

And as noted by poochwilly, A bad Day for trains just freezes at the opening screen.

I'm also running W7 64bit. Even though I have the ATSF Seligman Route, I opted for the full version of this BNSF Seligman because I wanted a stand-alone route. Whether this is significant I don't know.

Tony

[deagle]

Are you saying that the route itself was not really upgraded (track/scenery etc.)? Was it only a BNSF stock upgrade? Oh well, I guess I will wait for further clarification from those that purchase the upgraded route.

[poochwilly]

Got the upgrade package few days ago, nice stuff, works and looks okay, just a couple problems with 2 activities.SLI_bad day for trains 1 and 2, load up then freeze, any suggestions, and yes all is set correctly for windows 7 home 64 bit.

Thanks poochwilly

[cbff33]

Just got the upgrade. I like it.

[pinpuller]

Thanks for the clarification, I will get the upgrade.