Announcement

Collapse
No announcement yet.

Seligman 2 Act Pack from Bob Pickering

Collapse
Only viewable if you're a logged in user
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Seligman 2 Act Pack from Bob Pickering

    Hey everyone,

    I recently got Bob Pickering's Seligman Subdivision 2.0 activity pack, and I have to say alot of good work has gone into this endeavor. However I do have one issue, it seems that I'm missing files for the activities even though I have all the packs needed equipment. If him or anybody else could help me out on this situation would be fantastic. Two of the database files I'm missing are "SLI.FREIGHT/fred.ace" and "NEPS_UPS/TTAX_554363.wag"

    Thanks in advance
    -Patrick

    #2
    "SLI.FREIGHT/fred.ace" should be inside your Trains/Trainset/SLI.FREIGHT/ folder from Seligum Route 1.0 or 2.0 and you can get "NEPS_UPS/TTAX_554363.wag" from here

    Microsoft Train Simulator - Container/Trailer Cars MSTS NEPS UPS Trailer Set #1
    [ Download | View ]
    Name: neps_ups.zip
    Size: 10,089,862 Date: 01-07-2011 Downloads: 1,079


    MSTS NEPS UPS Trailer Set #1. This is a small set, but a solid set, of UPSZ/UPSU trailers and containers on spine cars. These can be seen scattered in various trailer train intermodals, or hot Z-Trains with solid UPS trailers and containers. Repainted on Hauke Heys original spine set. Some textures borrowed from Ted Curphey. Renumber and repaints by Shawn Kelley.
    sigpic
    My Facebook Page
    Rails of the World Forum
    Mophouse-MLTDownloads Froum

    Comment


      #3
      I also am having an issue with one of the activities in this package. amt4 needles to kingman. All the files appear to be there, but upon starting this activity, it crashes the sim shortly after loading the screen. A real head scratcher, as I don't have this issue from the other activites. Perhaps the author Bob Pickering, or someone else who is has experienced similar issues has a solution?

      Thanks. Amtrak Conductor (emeritus) Midwest, Southwest and Pacific Northwest Divisions

      Comment


        #4
        Originally posted by conrail4129 View Post
        ... "SLI.FREIGHT/fred.ace" ... Thanks in advance-Patrick
        A really excellent FRED is available at Tiger Trains. It is free, but you may have to register to get access. Also there is one at Diesels West and also I believe here in the library.
        Cheers, Gerry
        It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
        Forever, ridin' drag in railroad knowledge.
        Audi, Vide, Tace, Si Vis Vivere In Pace

        Comment


          #5
          SLI(dot)Freight is a folder installed by version 1 of SLI routes. SLI(underscore)Something is where the EOT is located in version 2 of the routes.
          My Open Rails videos https://www.youtube.com/channel/UClc...1kBPO2A/videos

          Comment


            #6
            Where can I download Bob Pickering's Seligman Subdivision 2.0 activity pack?
            sigpic
            Rich K
            See my pix at RailPictures.net
            Visit my web site The Railfan Gallery

            Comment


              #7
              Rich,

              Search the Train-sim library for Bob Pickering, you'll find the activity pack you're looking for.

              Comment


                #8
                I am having an issue with one of the activities in this package. amt4 needles to kingman. All the files appear to be there, but upon starting this activity, it crashes the sim shortly after loading the screen. A real head scratcher, as I don't have this issue from the other activites. Perhaps the author Bob Pickering, or someone else who is has experienced similar issues has a solution? ...Anybody?

                Thanks. Amtrak Conductor (emeritus) Midwest, Southwest and Pacific Northwest Divisions

                Comment


                  #9
                  Should have posted this in the ACTIVITIES section of the board so you wouldn't dig up an old thread. You only have to ask your question once...not everyone visits here on your schedule...check the activity with RouteRiter, then use RouteRiter's consist editor to check the stock and locomotives and any static consists... Just because it "appears" to be all there doesn't mean it is. You might have to load the activity up in your activity editor and "Verify the starting state".....If you don't know how to use the AE, you should learn.
                  Last edited by frankoburns; 06-29-2015, 12:31 PM.
                  I'm like an old SD9; It Growls, Howls & squeaks...but it will run forever!

                  Comment


                    #10
                    Try changing the start point. Fixed it for me. YMMV....

                    Comment


                      #11
                      FrankoBurns: I, like you am a grouch, but a please and a thank you will go a long way with me. I can not play your game if I don't know the rules. Personality is who I am - Attitude is who you are. Thank you.

                      Comment


                        #12
                        Thanks Jiggywatt. At least your answer is short and to the point and it helped.

                        Comment


                          #13
                          Originally posted by amtrakconductor View Post
                          FrankoBurns: I, like you am a grouch, but a please and a thank you will go a long way with me. I can not play your game if I don't know the rules. Personality is who I am - Attitude is who you are. Thank you.
                          I wasn't aware there was any sarcasm in my post...or attitude....simply straight to the point.
                          I'm like an old SD9; It Growls, Howls & squeaks...but it will run forever!

                          Comment


                            #14
                            "Should have posted this in the ACTIVITIES section of the board so you wouldn't dig up an old thread. You only have to ask your question once...not everyone visits here on your schedule...check the activity with RouteRiter, then use RouteRiter's consist editor to check the stock and locomotives and any static consists... Just because it "appears" to be all there doesn't mean it is. You might have to load the activity up in your activity editor and "Verify the starting state".....If you don't know how to use the AE, you should learn."

                            Since I am fairly new to the technical aspects of all this, re-read your reply and you might be able to see how I could have misunderstood your post, as a bit sarcastic, with the way some of it was worded, like asking my question twice, which is basically what I did, since everyone else appeared to be ignoring it and as far as my schedule goes, that's not really relevant. I did check everything with Route Riter and I am quite efficient with the AE. I never had a lot of time to experiment with some of this stuff until I retired last year, so once again, if I misunderstood, I apologize.

                            Comment

                            Working...
                            X