Announcement

Collapse
No announcement yet.

Slovenska Strela M290 Slovakia Arrow... need help .eng

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Thank-you Sam. I hope you enjoy your trip. I also wanted to make sure you found my comments on things like the yellow floor funny and that you know the efforts by you and the rest of the contributors on here are appreciated.

    I hAve been trying to build this train and one more for over 10 years! I had many faulse starts over the years. This included trying to find a modelor who would be willing to learn the specifics of MSTS and OR. I had plenty of people who could draw it but not many who would be willing to make it work in the game.

    The other problem is the forums I would use were not very willing to help. This surprised me especially in the Czech MSTS since I am Czech and the strela is quite famous historical landmark.

    I want to make sure that all of you guys know just how much I appreciate the help. Me and with Dingo got pretty far but now we just need to finish it up. We have a few items left to make this an amazing addon. Withiut you and the rest of the guys on here this project would stall or be put out incomplete.

    Comment


      Hi Rudi,
      I'm sure that I also speak for Sam, and the others, when I say that I am pleased to be of any help with your project.
      I'm surprised that the Czech Forum wasn't helpful. I am a member of three MSTS/ORTS Forums and without exception, all will offer help and advice to any other member who asks for it.

      You mentioned that you were having trouble with the horn sound. Could you provide, maybe, a Youtube link to let we 'foreigners' know what the M290 horn should sound like?.

      Cheers,
      Ged

      EDIT : I've found a Youtube video! - https://www.youtube.com/watch?v=MCoRL8QM8y8
      I don't think the sound we have in the current version, after removing the FrequencyCurve entry, is too far away.
      Last edited by slipperman; 04-21-2024, 16:41.

      Comment


        Hi Rudi,
        I've just re-downloaded the M290 which was uploaded 2 April 2024, expecting it to be updated, but it isn't!
        In fact, the .eng file is a copy of the Dash9 .eng file with minor modifications for use with the M290.

        I replaced the .eng file with that uploaded by Sam on 13 April 2024 and checked the list of proposed modifications. Five have not been applied and different .sms files have been used.

        Would it be possible for you to upload the latest version of the CSD_M290_Slovenska_Strela folder containing the revised .eng, .cvf and .sms files, please?

        Thanks,

        Regards,
        Ged
        Last edited by slipperman; 04-23-2024, 14:01.

        Comment


          Originally posted by slipperman View Post
          Hi Rudi,
          I've just re-downloaded the M290 which was uploaded 2 April 2024, expecting it to be updated, but it isn't!
          In fact, the .eng file is a copy of the Dash9 .eng file with minor modifications for use with the M290.

          I replaced the .eng file with that uploaded by Sam on 13 April 2024 and checked the list of proposed modifications. Five have not been applied and different .sms files have been used.

          Would it be possible for you to upload the latest version of the CSD_M290_Slovenska_Strela folder containing the revised .eng, .cvf and .sms files, please?

          Thanks,

          Regards,
          Ged
          yes let me see what happened and get the latest one updated and get back to you.

          Comment


            Hi Rudi,
            Many thanks, mate

            Ged

            Comment


              That last update we did had had an old ENG setup. The new one now utilizes the newer ENG. As well as the updated SMS files. We will upload it soon. I am currently working on the side views. trying to make it look better than what we had. These views will replace the Kiha views I had sitting in the CVF file.

              Comment


                I will be posting the updated model today or tomorrow..it's my weekend finally. I am looking forward to polishing this up and to hopefully fix the sounds.

                Comment


                  Ok, sorry for the long pause, here is the latest, and all that we have done. I guess the biggest thing is look it over on the changes and to see what we missed or if anything got changed back. The number one headache is the sound. If I could gain get the details and or the actual fix to make the sounds work. I appriciate all of your hard work!

                  Comment


                    I did see one issue, the smoke stacks were moved and now they are back above the bathroom so that has to be fixed.

                    Comment


                      Hi Rudi,
                      Thanks for the updated files.
                      I was going to report the positions of the exhaust stacks, but you beat me to it

                      LIGHTS - Sorry, but these are not right.
                      I have replaced them with those I posted earlier and they appear to be better, particularly when using the switched cab.
                      I have one question - when should the rear red lights be illuminated? (a) at all times, (b) when lights are set to BRIGHT or (c) when lights are set to DIM and BRIGHT.
                      In my Lights section it's (b) but it's very easy to change.

                      SOUNDS
                      If the FrequencyCurve section is removed from the Horn (Trigger 8) stream in M290strelacab.sms, the horn sounds the same as it does in the external view.
                      There is a delay after the SpaceBar is pressed before the horn sounds, which is probably because 'PlayOneShot' is used instead of 'StartLoopRelease'. If the latter is used, then a second trigger should be added to the Stream - Discrete_Trigger ( 9 ReleaseLoopReleaseWithJump () )

                      f have no doubt the above will also apply to the Bell (Trigger 10) stream - in this case, Trigger 11 should be added..


                      Cheers,
                      Ged
                      Last edited by slipperman; 05-08-2024, 14:45.

                      Comment


                        Ok Smoke stack fixed here is the latest copy

                        Comment


                          Hi Rudi,
                          Thanks, but you still need to apply the revised lights section and Sound changes detailed in my last post.

                          Depending on your response regarding the rear red lights, a change may need applying to my Revised Lights section.

                          Cheers,
                          Ged

                          Comment


                            I will be looking at the notes and the frequency thing. We tested a song file in its olace and it played faster than it should. I think thus may fix some issues. The strela horn should sound like it does in passanger view or pretty much playing the horn sounds right I. The folder and not the game.

                            The light I would assume should change color when in either dim or bright I would think..the direction should be elected by which way the reverser is pointing.

                            It's been a busy weekend with the car race and I have jury duty this morning in court....so no work for Rudy this week. I hope to be done with court so me and Pesky Dingo can spend some time adjusting this model.

                            By the way pesky has the bare game..no updates so for him the reverse cab does not work and lights may not work..whY update does he need?

                            Comment


                              Hi Rudi,
                              Thanks for your reply
                              I'll take your points in turn :
                              1. Although your in-cab .wav files are stereo, the frequency (8000Hz) is almost 26% lower than the MSTS default of 11025hz; This may have some effect.
                              As mentioned before, removing the FrequencyCurve section makes it sound a lot more like that heard in the external view.

                              2. I don't know what light you're referring to. Do you want the rear red lights to be the same colour irrespective of whether 'Dim' or 'Full' is selected, or should they be brighter when 'Full' is selected? (That is not usual, but could apply for this vehicle).
                              There is no facility in MSTS to select lights depending on the position of the reverser. You can only change them using the Cab Switch routine included in the Bin Patch - see 4.

                              3. I hope you won your race and found the baddies guilty!

                              4. For Cab Switching, Pesky needs to install the MSTS Bin Patch, BUT before doing so, he MUST install the MSTS Web update.
                              Although Eric has created a tutorial "How to correctly install MSTS in Windows 10" he has, unfortunately omitted links to either!
                              I did, eventually, find both, but they were very difficult to locate! May I suggest to Eric that they are both moved into their own group, eg MSTS Updates, for easier location, especially for those who don't have their file IDs?
                              The final version of the MSTS Bin Patch is available from this site as file ID 86097. If you have any problems with this one, the previous version is at file ID 86094. The MSTS Web Update is available as file ID 88043. If you don't already have MSTS v1.2, you should also install the Class 50 and SD40-2 updates - if you're not sure, installing both won't hurt!.​

                              Cheers,
                              Ged
                              Last edited by slipperman; 05-06-2024, 14:23.

                              Comment


                                Ok let me get rid of the frequency curve. As far as the frequency itself, I am not an audio guy but when I created the sound files it was suggested to bring them down. I still have the original ones that I made from youtube clips. I thought that the MSTS had some sort of a limit. I am not getting much help on the museum side of the Strela. I would assume that the half and full lights on the front would have no effect on the brightness of the read red lights. Is there some area to get help building the speedometers and the brake gauges?

                                Comment

                                Working...
                                X