Announcement

Collapse
No announcement yet.

Baldwin centipede DR-12-8-3000

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Baldwin centipede DR-12-8-3000

    Has anyone else had trouble getting the lights to work on this centipede under Binary ?

    #2
    Which model?
    Rick Franzosa - ZosaTrains
    http://www.valleypass.com/Sales/Sales.htm

    Comment


      #3
      Hi docol,
      If this is the download from Elvastower - NdeM6413.zip - the lights don't show because the "engine" carrying the headlight is not at the front of the consist, although, confusingly, the lamp is visually at the front!!

      Open up the NdeM6413-2.eng file in a Unicode-aware editor (NotePad, ConText, etc.) and, in each of the four Lights sections, change Unit ( 1 ) to read Unit ( 0 ) and re-save the file. You should find it works OK now

      If you wish to use the other loco, NdeM6412, then NdeM6412-2.eng will require amending in the same way.

      Cheers,
      Ged
      Last edited by slipperman; 06-18-2015, 16:46.

      Comment


        #4
        Dr-12-8-3000 prr 5812

        Originally posted by rfranzosa View Post
        Which model?
        This is the PRR centipede DR-12-8-3000 5812......though the lights don't work on the SAL unit either....I did change the "unit' #
        without success.

        Comment


          #5
          Fixd

          Originally posted by slipperman View Post
          hi docol,
          if this is the download from elvastower - ndem6413.zip - the lights don't show because the "engine" carrying the headlight is not at the front of the consist, although, confusingly, the lamp is visually at the front!!

          Open up the ndem6413-2.eng file in a unicode-aware editor (notepad, context, etc.) and, in each of the four lights sections, change unit ( 1 ) to read unit ( 0 ) and re-save the file. You should find it works ok now

          if you wish to use the other loco, ndem6412, then ndem6412-2.eng will require amending in the same way.

          Cheers,
          ged
          you are quite correct.....the light section in patrt 2 was the problem....setting the unit =0 fixed it....thanks

          Comment

          Working...
          X