Announcement

Collapse
No announcement yet.

Testing..

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Thanks very much, Shawn. Really is appreciated!
    Neil

    Chicago Railroading Fan

    Comment


      #17
      No problem Neil, I figured I'd get out what I have done now, before the new work schedule takes place. No longer on the spare board, so free time may not be so free.

      Here is a list of what is available, or will be available:

      boxcars:
      AOK 15037 - 50' F plate
      AOK 111873 - 50' F Plate
      AOK 111897 - 50' F Plate
      AOK 111923 - 50' F Plate
      AOK 111944 - 50' F Plate
      AOK 115121 - 50' F Plate
      AOK 727995 - 50' F Plate
      BKTY 160018 - 60' F Plate
      BKTY 160034 - 60' F Plate
      COER 172242 - 50' F Plate (Requires TS Payware)
      COER 172261 - 50' F Plate (Requires TS Payware)
      CP 220140 - 60' F Plate
      CP 220398 - 60' F Plate
      CRLE 119707 50' F Plate (Requires TS Payware)
      CRLE 119723 50' F Plate (Requires TS Payware)
      CRLE 119785 50' F Plate (Requires TS Payware)
      SMW 558708 50' F Plate
      UCRY 300150 50' F Plate

      Centerbeams: (All cars require TS Payware)
      AOK 28160
      AOK 28366
      AOK 28376
      BR 35502
      BR 35512
      BR 35523
      COER 860133
      COER 880188
      COER 880192
      CSXT 600891
      IANR 624364
      IANR 624446
      IANR 624455
      IANR 624516
      NOKL 733238
      NOKL 733262
      TTZX 856059
      TTZX 857178
      WRWK 863643
      WRWK 872216
      WRWK 873254
      WRWK 873382
      WRWK 873616
      WRWK 873638
      This also include two custom shape tie loads, and one custom shape wallboard load, as well as loads you can mix and match as you please, between Conifex, Irving green wrap, Irving red wrap, plywood, Resolute, Twin Rivers, Viking, Weyerhaeuser and white wrapped lumber. The ones you can mix and match, also require TS Payware.

      Covered Hoppers:
      BNSF 429933 - 3 bay grain hopper (Requires TS Payware)
      CEFX 380265 - 3 bay grain hopper (Requires TS Payware)
      CRDX 14923 - 3 bay grain hopper (Requires TS Payware)
      ITFX 366334 - 3 bay fertilizer hopper (Requires TS Payware)
      KCS 288161 - 3 bay grain hopper (Requires TS Payware)
      PLCX 20629 - 3 bay fertilizer hopper (Requires TS Payware)
      PLWX 23393 - 3 bay fertilizer hopper (Requires TS Payware)
      UNPX 127542 - 2 bay Sodium Chlorate hopper (UN1495)
      UNPX 128073 - 2 bay Sodium Chlorate hopper (UN1495)

      Gondolas:
      B&M 9015
      B&M 9083
      B&M 9091

      These do not come with a load. Normally used in MOW service however for scrap ties, scrap rails, or moving tie plates from one location to another on the system.

      Tankcars: (These require TS Payware)
      TILX 255799 - 33k Asphalt (UN3257)
      TILX 255827 - 33k Asphalt (UN3257)
      TILX 255840 - 33k Asphalt (UN3257)


      Woodchip Cars:
      AOK 6049 (requires TS Payware)
      EMRY 6315
      EMRY 6513
      EMRY 6543
      EMRY 6583
      EMRY 6812
      EMRY 6826 (requires TS Payware)
      EMRY 7219
      EMRY 7427 (requires TS Payware)
      EMRY 33634
      NBSR 874068
      NBSR 874163


      Logcars:
      EMRY 35464
      NBSR 8023
      -Shawn K-
      Derby Rail Shops
      Maine Central Mountain Division: 20% Track, 10% Scenery.

      Comment


        #18
        Excellent, Shawn. As always, thanks a lot for your time and effort!

        Comment


          #19
          I knew Shortlines & Leasers I've never even heard of or about are abound, but I had no idea KCS had AFCX 3-Bays in that Cream-Sickle( so to speak ) of a Scheme! Plus, those Photos used with the looks of Model Cars being bent-in & beaten on/into on some occasions, looks & works out greatly! No need to Create a whole new .S or F/A to Cover-Over The Existing one(s)!

          Comment


            #20
            Awesome set Shawn. Thanks for all your hard work on this set!

            Comment


              #21
              Re: the centerbeams. Needing some help with this :
              Per the Read Me -

              You will also need to do the same with the WRAPPED1.s file.

              CONIFEX.s -> CONIFEX.dds
              IrvingGreen.s -> IrvingGreen.dds
              IrvingRed.s -> IrvingRed.dds
              Plywood.s -> Plywood.dds
              Resolute.s -> Resolute.dds
              TwinRivers.s -> TwinRivers.dds
              VIKING.s -> VIKING.dds
              WEYERHAEUSER.s -> WEYERHAEUSER.dds
              WhiteWrapped.s -> WhiteWrapped.dds

              Do I use SFM for this? If so, how? Any assistance is appreciated.

              Comment


                #22
                I do this for MSTS to Open Rails/ORTS Things like Locomotives & Cars often. Un-Compress The Shape/.S. Now, It's gonna show up like almost any other Shape/.S. Find Keyword in box: Ace,...Gonna Take you to the Images Section( If wanting to re-name .dds just find Images instead), You'll see each thing named with .ace @ end. Rename .ace with .dds, and Re-Compress. Should work now( always does for me).

                Comment


                  #23
                  Thanks for your reply, but I know how to uncompress the s file and search using "image". I don't think I phrased my question well. My problem is that I am not seeing any ace or dds other than WRAPPED 1.dds when I uncompress the s file. I'm not seeing any of the others listed on the Read Me:
                  CONIFEX.s -> CONIFEX.dds
                  IrvingGreen.s -> IrvingGreen.dds
                  IrvingRed.s -> IrvingRed.dds
                  Plywood.s -> Plywood.dds
                  Resolute.s -> Resolute.dds
                  TwinRivers.s -> TwinRivers.dds
                  VIKING.s -> VIKING.dds
                  WEYERHAEUSER.s -> WEYERHAEUSER.dds
                  WhiteWrapped.s -> WhiteWrapped.dds

                  I'm seeing them (dds files) in the NVLW Centerbeams folder, but I'm not seeing any s files with those names. Hope that makes better sense...
                  Last edited by Curt C; 10-20-2022, 07:02 PM.

                  Comment


                    #24
                    Copy the Wrapped1.s file from the Mullan folder and create the .s files listed above from it in the centerbeams folder. Then uncompress and replace the above listed .dds file names in those .s files you just created.

                    I think you also need to copy the wrapped1.dds file, as the straps.s file calls for it for empty cars.
                    __________________________________
                    MMC(SS), USN (Ret.)

                    Comment


                      #25
                      Originally posted by Curt C View Post
                      Re: the centerbeams. Needing some help with this :
                      Per the Read Me -

                      You will also need to do the same with the WRAPPED1.s file.

                      CONIFEX.s -> CONIFEX.dds
                      IrvingGreen.s -> IrvingGreen.dds
                      IrvingRed.s -> IrvingRed.dds
                      Plywood.s -> Plywood.dds
                      Resolute.s -> Resolute.dds
                      TwinRivers.s -> TwinRivers.dds
                      VIKING.s -> VIKING.dds
                      WEYERHAEUSER.s -> WEYERHAEUSER.dds
                      WhiteWrapped.s -> WhiteWrapped.dds

                      Do I use SFM for this? If so, how? Any assistance is appreciated.
                      You will need to copy the wrapped1.s file and rename them as followed, conifex.s, IrvingGreen.s, etc.
                      Then in each s file you will need to rename the textures to match the same.

                      It's the same instructions and set up as the cars themselves for the centerbeams, boxcars, etc.
                      I left it vague due to everyone has their own way of doing the renaming process, compared to how I do it.

                      I believe as mentioned, you'll need the wrapped1.dds as well in the folder for the straps shape to work correctly texture wise.
                      -Shawn K-
                      Derby Rail Shops
                      Maine Central Mountain Division: 20% Track, 10% Scenery.

                      Comment


                        #26
                        Yes, it does. I see now. I had to copy The one Certainteed.s that's there with the .dds, COPY & rename to the next seen: Conifix & Change Its Naming too. That was it. Not enough shapes were Copied from what I can tell, did as said.

                        Comment


                          #27
                          Originally posted by marklester01 View Post
                          Yes, it does. I see now. I had to copy The one Certainteed.s that's there with the .dds, COPY & rename to the next seen: Conifix & Change Its Naming too. That was it. Not enough shapes were Copied from what I can tell, did as said.
                          The Certainteed shape is a custom shape I created, it is not the shape used for all the lumber loads provided. The wrapped1.s file from trainsimulations, is the one you need for all other lumber loads such as Conifex, Irving, Viking, etc, to work properly.
                          -Shawn K-
                          Derby Rail Shops
                          Maine Central Mountain Division: 20% Track, 10% Scenery.

                          Comment


                            #28
                            The only problem I had was on 5 EMRY 's' files the called ace files didn't exist. Just changed the ext. name to .dds and all was well. The files were EMRY 6583, 6543, 6513, 7219 , & 33634. Great set by the way!

                            Comment


                              #29
                              I want to thank everyone who helped me out w/ the centerbeams - really appreciate it!. Great set of cars, Shawn, some amazing stuff.

                              Comment


                                #30
                                Originally posted by lineman View Post
                                The only problem I had was on 5 EMRY 's' files the called ace files didn't exist. Just changed the ext. name to .dds and all was well. The files were EMRY 6583, 6543, 6513, 7219 , & 33634. Great set by the way!
                                Well, that was definitely an oversight on my end. The cars oddly work fine for me, unless I packaged the wrong shape files for the ones you mentioned. I'll have to take a look and get back to you. If that's the case of the wrong files making the cut, I'll have to upload a hotfix for them.
                                -Shawn K-
                                Derby Rail Shops
                                Maine Central Mountain Division: 20% Track, 10% Scenery.

                                Comment

                                Working...
                                X