Announcement

Collapse
No announcement yet.

bew cp sd40-2s question.

Collapse
Only viewable if you're a logged in user
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    bew cp sd40-2s question.

    hi
    ok so i was looking around for some cp rail stuff. and i saw these bew cp rail sd40-2s packs but unfortunately it need the SLI csx engine pack and that pack has been discontinue for now. i have question is there plans for update of thouse engines useing other sd40 shapes files? or is there another shape file that might work for those engines.

    #2
    There are no plans to update them to use other shape files, but the CSX engines are available through the Danny Beck Giveaway (see the thread on that subject elsewhere in the forum)
    sigpic
    Intel i5 2400, Mobo ASUS P8H67, Win 10 Prof 64bit, 32GB Ram, Nvidia GTX960 4GB, SB Audigy, 6.25TB HDD's.

    Comment


      #3
      ah ok. hey have you thought about making kicking horse pass 2 engine update. or is the engine with same roadnumber that are in khp2 in the pack?

      Comment


        #4
        The KHP 2 update is Maple Leaf Tracks.. so SLI products will not work well with MLT.. its a whole different model..
        Dave Edwards

        [SIGPIC][/SIGPIC]

        Comment


          #5
          As far as i can remember all the numbers of the engines in KHP2 are in the numerous packs, but you have to either alter all the names to drop in as direct replacements or alter the original consists and acts to look for them under the BEW pack names.
          sigpic
          Intel i5 2400, Mobo ASUS P8H67, Win 10 Prof 64bit, 32GB Ram, Nvidia GTX960 4GB, SB Audigy, 6.25TB HDD's.

          Comment

          Working...
          X