Announcement

Collapse
No announcement yet.

Static consists not shown in my activity

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Static consists not shown in my activity

    Hi There, I created an activity which works fine, but Out of 40 static consists Only 10-12 is shown in OR. Why is it so?


    Vin

    #2
    What does the log show as the reason for not displaying them?
    My Open Rails videos https://www.youtube.com/channel/UClc...1kBPO2A/videos

    Comment


      #3
      Originally posted by Ishwa View Post
      Hi There, I created an activity which works fine, but Out of 40 static consists Only 10-12 is shown in OR. Why is it so?


      Vin
      If you have created an Activity for a strictly Open Rails route and tried to use MSTS only content then you would not be able to place them. I would suggest that you forward the Log as the "Geepster" suggests.

      Comment


        #4
        I have found that if there is an error in one of the static consists, such as a missing or misnamed .wag file, subsequent consists may not display, OR seems to throw its hands up and stop processing the consists at that point.

        Jon

        Comment


          #5
          Originally posted by jonpd View Post
          I have found that if there is an error in one of the static consists, such as a missing or misnamed .wag file, subsequent consists may not display, OR seems to throw its hands up and stop processing the consists at that point.

          Jon
          OR will still run the activity, but without the "suspect" loose consists. If it is crashing, then you've got another problem.

          Incorrectly placed loose consists ( too long for siding or spur ) -- incorrect wag names, or other errors affecting loose consists --- OR will -- most often -- not place those consists and still run the activity. If there is an error affecting the player train...OR will not run the activity.
          Cheers, Gerry
          It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
          Forever, ridin' drag in railroad knowledge.
          Audi, Vide, Tace, Si Vis Vivere In Pace

          Comment


            #6
            It could be that you have a missing static consist.

            If one car is missing from a static consist, OR skips over that one car and places the rest of the consist, and then continues on to place the remainder of the static consists.

            But if an entire static consist is missing, it does not place any of the remaining static consists which are listed after that in the .act file.

            Comment


              #7
              Hi all, I don't feel that the problem is with the consists, becoz the same consist I placed in different locations is visible in one site but not in another. In an another activity I created, the same consists appear correctly (though I get wont get all the static consists placed). I checked the log file, it says some error with some wagons and .eng files, but these errors has no connection with the consists missing, in fact, even the consists with the error wag file appear correctly. although All the consists appear in TSRE5 v6958.

              Here's the log file
              OpenRailsLog.zip

              Vin

              Comment

              Working...
              X