Announcement

Collapse
No announcement yet.

Coaster and Metrolink Bombardier Cab-Cars will not load.

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lineman
    replied
    Yes the numbers are added via an F/A.

    Leave a comment:


  • csantucci
    replied
    Probably the numbers are added with a FreightAnim line. You may check whether your original file has such a line and copy it in your adapted file.

    Leave a comment:


  • markyisri
    replied
    Originally posted by Caltrain12 View Post
    It works wonderfully, with the only exception being that the numbers do not appear. That is a very minor detail,
    Can you post a picture of the numbers not appearing?

    Leave a comment:


  • Caltrain12
    replied
    Thank you, both for your help. I used the file from the freeware versions of both, as I had already aliased correct sounds and a proper cab to it. It works wonderfully, with the only exception being that the numbers do not appear. That is a very minor detail, and I am very greatful for you guys' help.
    Max

    Leave a comment:


  • Don6218
    replied
    I had that same solution, I used the Eng File from the GO Transit Cab Car and changed the appropriate lines, then they worked fine.

    Leave a comment:


  • Caltrain12
    replied
    Hello,
    Thank you so much for your response. I am going to try your solution, as I have tried almost everything else. If you could let me know if there is anything else that I should copy from the .eng file that would be much appreciated.
    Thanks

    Leave a comment:


  • ThatSolitaryGuy
    replied
    I had this same problem a while back, and I ended up resorting to a method that was probably too superfluous to recommend. It involves making a copy of one of the Surfliner cab car eng files and copying various values from the bombardier cars (power, braking, lights, shape file, etc.) into that copy, then renaming that file as one of the other two files being used.

    Again, there is probably a much quicker fix to this, one that only requires changing a few lines that I may have overlooked, but it doesn't seem that anyone else has addressed this issue to say for sure.

    Leave a comment:


  • Coaster and Metrolink Bombardier Cab-Cars will not load.

    Hello,
    I am trying to use the Coaster and Metrolink bombardier cab-cars in Openrails, with both Patrick Lopez's original mod, and the new mcupdate. After following all of the instuctions (and doing it many times over) it always says it fails to load either 601.eng or 2306.eng. I really want to use these cab-cars but everything I have tried fails to work. I am using the latest version of OpenRails, and also- the Coaster 3001 and 3002 that were included work perfectly fine.
Working...
X