"Urgent" 44100Hz Sound Upgrade Help Please

[derekmorton]

Post the sms file ( or zip it and post ) and let us fix it for you.

[marklester01]

Thanks! "If at first You( In General) Don't Succeed, Tryx3, again"! I have! I've not given up! I've since Updated The MC.SND_AC44Cab3.Sms( Renames, re-lines for better Bracketts( this what It means )<---?). The AC44_ScreamHigh & AC44_ScreamLow I've yet to get it to work.Still also Wish I can Delete Older Stuff No Longer Needed Though. This is Written on Phone*.

[marklester01]

Updated MC.SND AC44_CSXTCAB3.SMS Upload

Rolling-Moving Along Now. I've Updated as Said Prior to The Last Upload of .SMS for The MC.SND AC44V4 Sounds ( Updated with MLW's FDL16 & Stream-Lines-TS Thrown-In; The Add-on of 44100Hz is what "Hurt" so to Speak & to get The AC44_ScreamHigh & Low, which are 2 Streams ) to Activate. But, I've Listed What The V5.1 .SMS Checker has Said too & With that, the .SMS File's Uploaded as well.

[slipperman]

Hi,
The second "Dynamic brakes" Stream still has the duplicated FrequencyCurve entries, the first of which doesn't have matching open and close brackets. I suggested earlier that you remove that entry - if you do that now, the problem will be solved! I can't answer for any missing .wav files because you didn't attach the complete folder.

Cheers,
Ged

[marklester01]

Yes, I've included The Updated with The Post Below. And, if you look in TS's Seligman GE Engines, Theirs are like that & why I have it listed like that( The Stream stated under AC44 & ES44 Screams didn't Activate Prior Either ). It's in The ES44AC One. It has that. Thought it be cool to have a small,"Pre-Sound" Dynamic-Brake" Leading to To The Rest of The Dynamic Brake.

[marklester01]

Also about the Dynamic Brake Stream( & Why It's Named+ Set-UP):

Reply by
Admin Of TS:
»
About 3 Hours Ago
Hi Mark,

There's only one DB, but 2 sounds assigned to it. 1's the DB cooling fan, which makes the whining sound...The other's the engine throttle up....When DB reaches a certain level, the engines'll automatically throttle up to Run 4 to assist with the resistance loading.

Kind Regards,
Jason
@ The TS Helpdesk

[derekmorton]

Ok, repaired the problems,MC.SND AC44CW_CSXT_CAB3.SMS_updated_repaired.zip

See what happens now?

[marklester01]

SEEMS TO'VE FIXED IT! .SMS Checker V5.1 Reports NO Issues( Problems ) of ANY KIND NOW! Surprised @ how much space had to be taken though to write that kind of,"Stream Chain" ( so to speak ) though. One( since it was,"Counter-Acting" what TS Stream & NAVS Sounds Provided, I deleted The Motion Wheel Sounds( Didn't seem to work anymore prior anyway for whatever reason; including the 44100hz updates that required spacing & extra Bracket Placing ). So, I @ first just left The Brake Command Streams. Later, Just Deleted It & Installed NAVS 645E & TE ( for short ) Locomotive Brake Sounds, but kept the German(?) Brake Sounds in-place over The Cast-Iron Sounds because( I'll face it, yes, They're being re-built into CMs on CSXT, but The 1st. Bathches of Theirs were in The 90s & weren't Cast-Iron Brakes,LOL ! ). Anyway, then the car sounds. Accidental named wrong files when transferred( oops ). While The Checker says "Not Found due to Alias( wonder if next version can be fixed some way to prevent this? ), a Few Triggers had to be re-numbered to line up, & The Files re-named according both to the .sms Itsself & The Folder. Once done, it's fixed too! Now, to move onto the next parts & should be,"Smooth Rail Riding & VRS" from here till whenever hopefully. Thanks BOTH You & SlipperMan.