Announcement

Collapse
No announcement yet.

Fish's Project Thread

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fish's Project Thread

    Need to Finish and or Fix

    Need to Apply Numbers on the Numberboard
    was on back Burner
    Click image for larger version

Name:	image.png
Views:	31027
Size:	424.7 KB
ID:	2304562


    Error of Numbering Thats Planning to be Fixed
    WFRX SD70MAC
    Click image for larger version

Name:	image.png
Views:	1344
Size:	390.6 KB
ID:	2304563
    Ready to go
    Reupload on this Unit

    Click image for larger version

Name:	image.png
Views:	1338
Size:	366.0 KB
ID:	2304564

    Fix the Body on this one

    Click image for larger version

Name:	image.png
Views:	1339
Size:	380.0 KB
ID:	2304565

    Lot of Work Is to be Done


    What Rolling stock should i do?
    Brandon Leister
    Leister Locomotive Works
    My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

    #2
    Just remember not to include copyright payware files in your uploads.

    Comment


      #3
      Originally posted by yellowdog View Post
      Just remember not to include copyright payware files in your uploads.
      Alright
      Brandon Leister
      Leister Locomotive Works
      My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

      Comment


        #4
        The "What If" ROck Island Gevo in the Blue and White Paint Job... will be up tonight at some point Along with L&N.. Agian
        Brandon Leister
        Leister Locomotive Works
        My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

        Comment


          #5
          Originally posted by yellowdog View Post
          Just remember not to include copyright payware files in your uploads.
          any Ideas on Rolling Stock?
          Brandon Leister
          Leister Locomotive Works
          My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

          Comment


            #6
            Rock island 4440 has a some other Blue Oddities
            Brandon Leister
            Leister Locomotive Works
            My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

            Comment


              #7
              So... I'm Steeping up to do this one
              But i Want to do a Part of The Tazewell , Peoria And Western
              but the Issue resides is that the DECOWHY
              font doesn't have the TP&W in there Both a Genessee & Wyoming
              Corp Famley of locomotives ...

              2056 a GP38 Other one in 2nd is 2105 or 2405
              any Questions... ?

              Click image for larger version

Name:	image.png
Views:	1641
Size:	1.13 MB
ID:	2305344
              Brandon Leister
              Leister Locomotive Works
              My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

              Comment


                #8
                Got to Rework the Textures on this a 2nd WAMX Unit as a 2 pack 4124 and 4125 Release sometime the 4th of july


                Click image for larger version

Name:	image.png
Views:	1440
Size:	319.2 KB
ID:	2305627
                Brandon Leister
                Leister Locomotive Works
                My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

                Comment


                  #9
                  I offer what I hope will be taken as some constructive advice. First, while a fully realize that Danny Beck's models from a number of years ago are easily available and do have a lot of detail for their era, the fact remains that they are old "Fred Flintstone wheel" models that are no longer of a model quality compared with many newer offerings. Repainters wind up spending a lot of effort to repaint a base model that will always look dated and inferior to newer, better rendered models. This is not a "cut" against Danny Beck--his models were ahead of their time in the early 2000's, but it's 20 years later now.

                  Secondly, in some of these particular repaints, I see some boo-boos that become very visible in the sim. As an example, the orange "patch" on the side of the WFRX unit wiped out all of the door and latch details on the hood. There are some good techniques that have been posted about out there to prevent/remedy some of those type repainting issues. I would hope that you would study up on them.

                  Comment


                    #10
                    Originally posted by wwhall View Post
                    I offer what I hope will be taken as some constructive advice. First, while a fully realize that Danny Beck's models from a number of years ago are easily available and do have a lot of detail for their era, the fact remains that they are old "Fred Flintstone wheel" models that are no longer of a model quality compared with many newer offerings. Repainters wind up spending a lot of effort to repaint a base model that will always look dated and inferior to newer, better rendered models. This is not a "cut" against Danny Beck--his models were ahead of their time in the early 2000's, but it's 20 years later now.

                    Secondly, in some of these particular repaints, I see some boo-boos that become very visible in the sim. As an example, the orange "patch" on the side of the WFRX unit wiped out all of the door and latch details on the hood. There are some good techniques that have been posted about out there to prevent/remedy some of those type repainting issues. I would hope that you would study up on them.
                    that will be taken fur sure but the problem is with Paint dot net Doesnt want to apply Color over the Main thing im working on,...
                    if you can find them good Techniques by all means... thanks...
                    Brandon Leister
                    Leister Locomotive Works
                    My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

                    Comment


                      #11
                      Originally posted by Fish4890 View Post

                      that will be taken fur sure but the problem is with Paint dot net Doesnt want to apply Color over the Main thing im working on,...
                      if you can find them good Techniques by all means... thanks...
                      Yeah... Use something like Gimp or Paint Shop.Pro instead of Paint.net...
                      -Shawn K-
                      Derby Rail Shops
                      Maine Central Mountain Division: 25% Track, 12% Scenery.

                      Comment


                        #12
                        Originally posted by CSRX View Post

                        Yeah... Use something like Gimp or Paint Shop.Pro instead of Paint.net...
                        oh Thanks Shawn ...
                        Brandon Leister
                        Leister Locomotive Works
                        My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

                        Comment


                          #13
                          Click image for larger version  Name:	Screenshot 2024-06-15 145150.png Views:	0 Size:	25.3 KB ID:	2305710
                          but the Issue resides is that the DECOWHY
                          font doesn't have the TP&W in there Both a Genessee & Wyoming
                          Corp Famley of locomotives ..​
                          You can only fit so much into the "easily accessible" glyphs of a particular font file. So you have to make choices... I mean I can add this one... but maybe you can see my point... how do you choose which ones are there?

                          By The Way... version 1.2 with TP&W is now available for download.
                          Last edited by pwillard; 06-15-2024, 14:23.
                          http://www.railsimstuff.com
                          Just Blender now, 3DCrafter only when I have to.
                          formerly The Keystone Works (All Permissions Granted)
                          https://github.com/pwillard/MSTS-replacement
                          sigpic

                          Comment


                            #14
                            Originally posted by pwillard View Post
                            Click image for larger version Name:	Screenshot 2024-06-15 145150.png Views:	0 Size:	25.3 KB ID:	2305710

                            You can only fit so much into the "easily accessible" glyphs of a particular font file. So you have to make choices... I mean I can add this one... but maybe you can see my point... how do you choose which ones are there?

                            By The Way... version 1.2 with TP&W is now available for download.

                            Oh Thanks Pete... i didnt Expect that ... Thats Awesome
                            Brandon Leister
                            Leister Locomotive Works
                            My PC--> CPU: Intel i5-11600K RAM: 32GB DDR4-3200 GPU: MSI VENTUS 2X OC 12GB RTX 3060

                            Comment


                              #15
                              Paint.net should have the ability to adjust opacity for a layer, so that you don't obliterate the underlying layer details with latches and hatches....
                              If you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, items saved in our library or the ongoing development of our TSRE Fork, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!

                              Comment

                              Working...
                              X