BEW Projects Thread

[burgerbern]

Got the sides sorted for the next container, used one of the pics OSSIE sent me and rearranged one side to create its mirror image on the other side, just a quick screenie of a test in ORTS to check it all looked ok. Picture does not do it justice.

[burgerbern]

Took all morning but here is the finished roof textures, Pink is one hell of a colour to change to and get to look right! as you can see this pic shows up the side textures much better than the one above.

[qballbandit]

Extraordinary!

[burgerbern]

Have both ends recoloured, just adding the door locking mechanisms and got to move the hinges before adding all the lettering etc

[burgerbern]

almost there, just a load of fiddley tiny weights and volume info to fit in a very small space above the 53' on the right side, job for tommorrow.

[burgerbern]

My Apologies, i made a mistake in the last set i uploaded, when i removed the top container from the shapes for the dry containers i forgot to remove the base of the top container, thus in Shape Viewer you could see a black interference pattern at the ends of the roof. It was ok in the simulator, so i have corrected that and will put replacement shape files in the triple pack soon to be released. This involved the following road numbers, UnitA_53b_WARU.s , UnitB_53b_ESTU.s & UnitD_53b_YRCU.s the reefer units are unaffected as i did those correctly.

[burgerbern]

The third and final container for this project is a reefer unit as below, once done the set with the corrected shape files for the previous set will be uploaded.

[burgerbern]

Progress this morning, just the roof numbers and change the door number and the set is finished, when i next get a chance to work on them some more i will try to get them done and should be able to release probably tommorow morning.

[qballbandit]

I must say, my COFC trains are really a new highlight in my activities thanks to you, and Shawn. These are smashingly good. Huge thank you!!!!

[burgerbern]

wait till you see the door end of the cause unit, the small print is readable thanks to upping the ace file size

[burgerbern]

MY UPLOAD PROJECT NUMBER 218 STARTS BELOW

teaser shot, just started on this

[burgerbern]

Something different for this set, This will be the A-unit

[Curt C]

Do you ever sleep? Just kidding; these look fantastic - thanks much!

[CSRX]

Really looking forward to that blue Hub container!

[burgerbern]

This will be the "C" unit



and progress on the cause container this morning which will be on the "D" unit, first up found a blue end pic so other than changing the reporting mark number and adding the large 53' the end is complete, tackled the hard bit this morning the reverse side, easy enough to do except for the soldier and girl as they are reversed for the opposite side which is not a huge problem except for the lettering wich goes accross near the bottom, as of course that also gets reversed, so had to resort to recreating the text and then inserting it a letter at a time while clearing up the old letters showing still and matching the removed letters area to the rest of the clothing, i think i got it

bottom container shot is the reversed one from the original on top.