Report bugs for Update 5.23.2022 here

[westerngy]

Please report any bugs you find here in this thread. Remember to explain what happened and if the issue was repeated or a one off happening..

Thanks and yes the Dev do see what you post here.

[Brad3816]

Disregard

[Brad3816]

--Keyboard commands are still bound to the simulator when an editable dialog box such as User Notes, train naming, saving, etc. are open (If you type 'wet vehicle' the avatar moves forward, the wipers turn on and the whistle blows). Additionally, when you attempt to reassign the up/down/left/rights key in the Keyboard Menu, the keys navigate away from the box, preventing the task.

--Otto still isn't lining LAC trains into Hobart Yard

--Wipers aren't clearing the engineer's glass on the SJVR gp40.

[westerngy]

--Keyboard commands are still bound to the simulator when an editable dialog box such as User Notes, train naming, saving, etc. are open (If you type 'wet vehicle' the avatar moves forward, the wipers turn on and the whistle blows). Additionally, when you attempt to reassign the up/down/left/rights key in the Keyboard Menu, the keys navigate away from the box, preventing the task.

--Otto still isn't lining LAC trains into Hobart Yard

--Wipers aren't clearing the engineer's glass on the SJVR gp40.

reported and was missed about the wipers..Thanks

[seagoon]

A couple of graphical oddities since the update, seen from the cabview (not external and not head-out) and not with the SD locos.

This first one is a perfect, dark, circle which moves randomly across the view, sometimes disappearing and then re-appearing.
Run8_UFO.jpg


The second is a dark, grainy blur just above the bottom edge of the screen and a shadow effect (covering the speed boards in this image).
Run8_Shadow.jpg


Note that neither anomalies appear when using the CSX locos on A-Line/Waycross, only on the BNSF/UP units and it doesn't matter what time of the day it is.

[Brad3816]

I am experiencing the same dark blob Bruce describes.

[SurvivorSean]

CARS PICK SWITCHES AND DERAIL TOO OFTEN

I built and ran an 8300 foot train at 1.2 HPT yesterday for Q455 Waycross to Taft (5 big units up front the 5th was isolated). 3 times on this trip I picked a switch that caused a car to derail. I'm not sure what the likleyhood of this is in real life but it seemed a little too much.

Thanks

Sean

[SurvivorSean]

AI SPAWN BUTTONS DISAPPEAR

I was over at Callahan trying to adjust the spawn rates when I was down to the Reefers. My server is on so I haven't tried relaunching, but the only way the buttons would appear again is if I spawned a train. Even after doing this I could never back out and the button would disappear again. Now I'm stuck in Callahan Reefers. Assuming main menu will reset this issue.

I have seen other wonky stuff where it defaults back to Bolen when in certain menus.

Thanks

Sean

[SurvivorSean]

AI SPAWN BUTTONS DISAPPEAR

Seems to be a bug related to probablility adjustment as the same thing happened when adjusting Bolen immediately after changing several probabilities on that page.

Just clicking on a category seems to get the buttons back. I guess the focus is on the bars and the buttons dissapear.

Thanks

Sean

[bnsf4794]

The black sun is a reflection glitch in the shader when you're pointed in just the right direction, and is not specific to any particular route or region.

The second photo is the exact same thing, but seems bigger because the glitch is on a "rougher" part of the glass where there's dirt.

Either way, you're seeing the sun reflected below the horizon, and it's dark because the color sent to the shader is zero.

[seagoon]

The black sun is a reflection glitch in the shader when you're pointed in just the right direction, and is not specific to any particular route or region.

The second photo is the exact same thing, but seems bigger because the glitch is on a "rougher" part of the glass where there's dirt.

Either way, you're seeing the sun reflected below the horizon, and it's dark because the color sent to the shader is zero.

Thank you.....but there's nothing I can do to correct it.

[theswitcher]

OTTO taking control of manual switches. https://www.youtube.com/watch?v=uQj-ngW9AM0

Not sure if it is a bug or not. Problem is when OTTO is active i now have to babysit the engines coming into West Colton service center. Normally i just let them run to the service area and have them relinquish while i am doing other jobs, now i have to either watch them or place engines ahead of them to stop them taking off down the mainline and off to the Yuma Sub.

As you can see i set the 3 switches ahead of the engines against the engines and OTTO reset them .
This does not happen in Version 3 update 2, only Version 3 Update 3.

switch

[coopers1]

Continue to have this problem no matter what updates I have. Cars rock back and forth so violently it puts the train in emergency. I have video but it won’t let me post it here.

[westerngy]

Continue to have this problem no matter what updates I have. Cars rock back and forth so violently it puts the train in emergency. I have video but it won’t let me post it here.

Have a look and see where your Seasick Multiplier is set at under Sim-Options and using the slide you can turn it up or down. I'm taking this is what might be happeneing as you gave very little information other than rocking back and forth.

[coopers1]

Have a look and see where your Seasick Multiplier is set at under Sim-Options and using the slide you can turn it up or down. I'm taking this is what might be happeneing as you gave very little information other than rocking back and forth.

I've done that. This is not while in the cab. I've uploaded the video to my youtube.

https://www.youtube.com/watch?v=rLXIn2pZz0g&feature=youtu.be