I'll have to look into the frame rate but after testing this morning on my Windows 7 machine I just put the route, and all the pertinent files onto this Windows 11 laptop and the wheel slip happens...
Type: Posts; User: charland
I'll have to look into the frame rate but after testing this morning on my Windows 7 machine I just put the route, and all the pertinent files onto this Windows 11 laptop and the wheel slip happens...
OK, if my camera is on the shaded side of the train I do not get the wheel slip warning, if I rotate the camera 30 degrees to get the same angle on the sunny side of the train I do get the continuous...
Hi Derek,
If you have the ONR62 Power, it contains both, the S units have the "DieselEngineSpeedofMaxTractiveEffort( 11.7mph)" and the RS units have "DieselEngineSpeedofMaxTractiveEffort(...
So I ran a little experiment. Changed the power from an ONR RS-2 to a CNR RSC-24. There was differences in the engine files and it turns out the CNR RSC did NOT trigger the continuous wheel slip or...
Haven't tried yet Derek but I did update to the last stable version, 1.4 and it's still doing the same things.
Paul
Hi All,
I've been working on activities for the ONR route and now am working on a Timmins Yard activity. Getting a bit frustrated.
When my single RS-2 is sitting on straight level track and I...
Hi All,
The route is complete and tested and I'm down to making and running activities.
Here are two screenshots taken in Connaught from two different activities, train 415 and train 152...
That's great Don, at least you have them now.
Paul :-)
Try
app_70.zip
and
app_80.zip
They are both there on the first page of a charland search... I'm having to trouble finding them either way Don.
Hi Don,
Search for app_70 and app_80 or just search for charland, they are near the bottom of the first page. "app" is Abitibi Power and Paper.
Paul :-)
Hi All,
Route building is finished and it's been tested by several people.
Just finished uploading the last of the rolling stock created for the route, now it's down to creating loading...
The vast majority of things built for MSTS will also run on OR. In the last few years things like cabviews have improved, the ace files have gone from 512 pixels to 1024 pixels and that's the only...
Might help people help you if you would try again and write down exactly what the error is you're getting.
Paul :-)
When I was making the activities for the FJGv2 I was able to work from the first act file to crate the second and so on. This involved using the switch list to place the rollingstock that was...
Hi Ged,
I can open it and change the name of the activity but the problem then becomes how do you convert that to an activity file from a .save.
I was able to open the file. At the top of the...
Thanks Ged, found them. Now to google ".save" files and see what opens them!
Paul :-)
So I set up a small activity. Ran it in OR, just an engine and three cars, spotted two cars, picked the third up and headed off. Pressed F2 and I can open that activity where I left off, so OR is...
Thanks Ged,
Now I have to figure out what OR reads when there is a saved game and how to open it!
Paul :-)
Hi,
Is there a way to open a saved activity file (ASV). It says it can be opened using note pad but it appears to be in a machine language or compressed. I tried opening it with Polymaster to...
So you don't have to go find NED maps, it does that for you or goes to a server by itself?
Paul :-)
Never tried Load Maps Scott. Maybe when I'm finished the ONR route I'll do some more experimenting with TSRE.
Paul :-)
1/9 Arc sure would be nice to use. Now if you could get DEMs that accurate and plot markers in Goolge Earth that was accurate at the same time that would be great. When I was doing the DAR the...
Hi Scott,
Rich's route is 20 years old, might have been earlier then 1/3 Arch NEDs back then. The first version was the first route I downloaded and installed that actually worked!
About 10...
Hi Scott,
Wouldn't you just create a new route, then replace the World and Tile folders with the route you have? If you've saved one of the first backups for the route that had a minimum of...
I would have been 7 or 8 at the time. I knew by the conductor's reaction it wasn't a good thing!
Paul :-)