Rear lights dont show up

[m7train]

Any help on this the rear tail lights wont show up. Here is the lights section from the Eng file.

Lights ( 9
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ff0000 )
Position ( -1.075803 1.943217 12.90878 )
Azimuth ( 0.1718875 0.1718875 0.1718875 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffff )
Position ( 0.227054 3.839904 12.97816 )
Azimuth ( 0.1718875 0.1718875 0.1718875 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffff )
Position ( -0.1354574 3.849039 12.99364 )
Azimuth ( 0.1718875 0.1718875 0.1718875 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffff )
Position ( 0.9546555 1.935506 12.90639 )
Azimuth ( 0.1718875 0.1718875 0.1718875 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( fff9f9f9 )
Position ( 3.699503E-02 2.737437 13.51812 )
Transition ( 0 )
Radius ( 100.0 )
Angle ( 15.0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffff )
Position ( -0.9128078 1.891768 12.93441 )
Azimuth ( 0.1718875 0.1718875 0.1718875 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 3 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ff0000 )
Position ( 1.190779 1.939072 12.90743 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 800000ff )
Position ( 1.541708 3.100329 12.53586 )
Azimuth ( 90.04182 90.04182 90.04182 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
Light (
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.5 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 800000ff )
Position ( -1.451915 3.029188 12.53187 )
Azimuth ( -89.97395 -89.97395 -89.97395 )
Transition ( 0 )
Radius ( .4 )
Elevation ( 0 0 0 )
)
)
)
)
)

I set the rear red lights to headlight (3) for bright and unit (3) for rear.

[baldwin]

Tail lights need a negative figure in the Z axis.

The position line - Position ( -1.075803 1.943217 12.90878 )for a rear light should be something like - Position ( -1.075803 1.943217 -12.90878 )