Results 1 to 3 of 3

Thread: Raildriver reverser lever

  1. #1

    Default Raildriver reverser lever

    Just received a used raildriver in very good condition. I've set it up and everything seems to work. The question is troubleshooting the reverser, I change games from Marias Pass to NEC and after selecting the right engines and checking "run raildriver" in train store I choose a senario. When I put reverser in forward I get a series of beeps. I properly calibrated everything. How do I troubleshoot this?

  2. #2
    Join Date
    Aug 2004
    Location
    carmel valley, ca, us.
    Posts
    196

    Default

    Beeps will occur if one attempts to move the reverser lever while the train is in motion. Train must be stopped to successfully move the reverser. AA

  3. #3
    Join Date
    Aug 2003
    Location
    Oshawa, Ontario.
    Posts
    99

    Default

    The actual locomotive has a locking feature so you can't move the reverser handle unless the throttle is in "IDLE" Too bad PI Engineering didn't do the same.

    I'm hoping some day the Steam & PI Engineering will fix the inconsistent behaviour of this controller. It's really frustrating. I expect pigs will fly before this happens though.

    Richard

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •