Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Random Run 8 shots from all routes

  1. #1
    Join Date
    Jul 2002
    Location
    Metro Vancouver
    Posts
    3,032

    Default Random Run 8 shots from all routes

    Go ahead and post your screenshots



    screeny_2018.08.16 16.21.41 by miller_d22, on Flickr
    Attached Images Attached Images
    Last edited by westerngy; 08-18-2018 at 09:32 AM.
    Work Safe play hard

  2. #2
    Join Date
    Jul 2004
    Location
    Wareham, Dorset, U.K.
    Posts
    2,512

    Default

    ....err ....that needs to be at least 3 times larger if you want anyone to see it
    Geoff
    Dorset - near The Swanage Railway.
    UK

  3. #3
    Join Date
    Jul 2002
    Location
    Metro Vancouver
    Posts
    3,032

    Default

    Geoff I only used the upload image here at TS
    Work Safe play hard

  4. #4
    Join Date
    May 2010
    Location
    Saskatchewan, CA
    Posts
    765

    Default

    I never tried Run8 yet. Is there a route world editor available for use? I would also look for a 3D import/ exporting tool for Run8 as well. Would love to build the CN Wainwright Sub.
    Rory

  5. #5
    Join Date
    Jul 2004
    Location
    Wareham, Dorset, U.K.
    Posts
    2,512

    Default

    Quote Originally Posted by westerngy View Post
    Geoff I only used the upload image here at TS
    I appreciate that gives thumbnails. I'm talking about the image size when you click on it.
    Geoff
    Dorset - near The Swanage Railway.
    UK

  6. #6
    Join Date
    Jul 2002
    Location
    Metro Vancouver
    Posts
    3,032

    Default

    Quote Originally Posted by lateagain View Post
    I appreciate that gives thumbnails. I'm talking about the image size when you click on it.
    How's that Geoff
    Work Safe play hard

  7. #7
    Join Date
    Apr 2001
    Location
    St. Catharines, Ontario, Canada.
    Posts
    3,194

    Default

    Quote Originally Posted by tie View Post
    I never tried Run8 yet. Is there a route world editor available for use? I would also look for a 3D import/ exporting tool for Run8 as well. Would love to build the CN Wainwright Sub.
    Hello Tie V2 currently has no editors. The only thing you can do I believe is swap out horns, or with experience write your own train consist files. My software RTS in V1 was able to do this, but I never updated it for V2.

    Way back in V1 for about a year they talked about a SDK (Software Development Kit). It was set to approximately come to being 1 year after launch. Unfortunately it eventually faded from the Run8 site. The only explanation that I've seen is that the editors they use are too buggy or too far away from being a reality (I'm paraphrasing John lead programmer's quote on this). That was 7 years ago approximately?

    V2 never included such talk until I think over a year ago when John also quoted "making some of the editors available". Mikey who developed the northeast is on my forums. Jason and Jim can be found here. I'll mention it to Mikey as I'm curious. V3 was last rumored by Brad in a FB post for the end of the year. There has also been a few health issues to deal with by some of the above mentioned developers.

    Anyways we are off topic being this is a screen shot forum. But I thought you deserved an answer.

    Take care

    Sean

  8. #8
    Join Date
    Apr 2001
    Location
    St. Catharines, Ontario, Canada.
    Posts
    3,194

    Default

    Quote Originally Posted by westerngy View Post
    How's that Geoff
    For some reason your image wasn't showing up big earlier as I seen it too Dale. Looks good now

    Thanks

    Sean

  9. #9
    Join Date
    May 2010
    Location
    Saskatchewan, CA
    Posts
    765

    Default

    Quote Originally Posted by SurvivorSean View Post
    Hello Tie V2 currently has no editors. The only thing you can do I believe is swap out horns, or with experience write your own train consist files. My software RTS in V1 was able to do this, but I never updated it for V2.

    Way back in V1 for about a year they talked about a SDK (Software Development Kit). It was set to approximately come to being 1 year after launch. Unfortunately it eventually faded from the Run8 site. The only explanation that I've seen is that the editors they use are too buggy or too far away from being a reality (I'm paraphrasing John lead programmer's quote on this). That was 7 years ago approximately?

    V2 never included such talk until I think over a year ago when John also quoted "making some of the editors available". Mikey who developed the northeast is on my forums. Jason and Jim can be found here. I'll mention it to Mikey as I'm curious. V3 was last rumored by Brad in a FB post for the end of the year. There has also been a few health issues to deal with by some of the above mentioned developers.

    Anyways we are off topic being this is a screen shot forum. But I thought you deserved an answer.

    Take care.

    Sean
    Thank you Sean for the information. I guess I'll stick with Open Rails for creating content for the time being.
    Rory

  10. #10
    Join Date
    May 2010
    Location
    Ipswich, Australia
    Posts
    176

    Default

    Quote Originally Posted by westerngy View Post
    Go ahead and post your screenshots



    screeny_2018.08.16 16.21.41 by miller_d22, on Flickr
    Which route is this on?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •