Results 1 to 9 of 9

Thread: JUL Turbo Train United Aircraft

  1. #1
    Join Date
    Jun 2009
    Location
    Oshawa ON
    Posts
    1,478

    Default JUL Turbo Train United Aircraft

    Hello all, I having an issue that I cannot resolve. The Headlamps on ALL the versions of the U-A Turbo Train from here have the headlamps way out of place when viewed externally.

    From in the cab they seem to be facing down the track, but when looked at in an external camera view they are way out of place. One (Strobe) is laying on the track and the other (Steady) is under the Power Car. I have viewed the changes I made in Shape Viewer and can see what it defines as headlamp #1 & #2 high up and in the correct area, but when view in Game, Open Rails is all I use, they are misplaced as you can see in the accompanying picture. I have also included the ENG file for the JUL Version.

    Any help on this would be appreciated.

    resized_JUL Turbo Headlamps_448x189.jpgJUL_Turbo_Train.zip

  2. #2
    Join Date
    Jun 2009
    Location
    Oshawa ON
    Posts
    1,478

    Default

    Ok, not much reaction to this asking for help. I e-mailed the Builder as per the e-mail given but it came back as undeliverable.

    Regarding Shape-Viewer, I had a look in there as instructed by opening the Eng File with it, and I see where the "Lights" are, and they seem to be in the correct places.
    Now, when I tried the same with another locomotive S-V showed the Locomotive Body as well as the lighting and the orientation. When viewing the Turbo, however, only the light symbols showed in the picture.

    What would be the reason for this? S-V shows a picture when the Shape File is selected. Also Con-Builder will not show a picture of it either. I looked and the file is compressed correctly.

  3. #3
    Join Date
    Feb 2008
    Location
    Lexington, Ky
    Posts
    2,452

    Default

    Some of the codes do look off. Too much to explain or give corrections.
    If you want to send me the files, I will check/correct it....
    Send me a pm.
    Rick

    http:\\mononrr.com

    MONON-2


  4. #4
    Join Date
    Mar 2007
    Location
    Phoenix AZ
    Posts
    407

    Default

    These work for me

    Lights ( 8
    Light (
    comment( Sphere of light Dim)
    Type ( 1 )
    Conditions (
    Headlight ( 2 )
    Unit ( 2 )
    )
    Cycle ( 0 )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( eef2bd4a )
    Position ( 0.0 2.9 13.3 )
    Transition ( 0 )
    Radius ( 200.0 )
    Angle ( 15.0 )
    )
    )
    )

    Light (
    comment( Sphere of light Bright)
    Type ( 1 )
    Conditions (
    Headlight ( 3 )
    Unit ( 2 )
    )
    Cycle ( 0 )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( ffffffff )
    Position ( 0.0 2.9 13.25 )
    Transition ( 0 )
    Radius ( 400.0 )
    Angle ( 15.0 )
    )
    )
    )

    Light (
    comment( Head light Upper Left Dim )
    Type ( 0 )
    Conditions (
    Headlight ( 2 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( eef2bd4a )
    Position ( .27 3.12 13.24 )
    Azimuth ( 0.0 0.0 0.0)
    Transition ( 0 )
    Radius ( .3 )
    Elevation ( 0 0 0 )
    )
    )
    )

    Light (
    comment( Head light Upper Right Dim )
    Type ( 0 )
    Conditions (
    Headlight ( 2 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( eef2bd4a )
    Position ( -.25 3.12 13.24 )
    Azimuth ( 0.0 0.0 0.0)
    Transition ( 0 )
    Radius ( .3 )
    Elevation ( 0 0 0 )
    )
    )
    )

    Light (
    comment( Head light Lower right Dim )
    Type ( 0 )
    Conditions (
    Headlight ( 2 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( eef2bd4a )
    Position ( -0.27 2.7 13.29 )
    Azimuth ( 0.0 0.0 0.0)
    Transition ( 0 )
    Radius ( .3 )
    Elevation ( 0 0 0 )
    )
    )
    )

    Light (
    comment( Head light Upper Left Bright )
    Type ( 0 )
    Conditions (
    Headlight ( 3 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( ffffffff )
    Position ( .27 3.12 13.24 )
    Azimuth ( 0.0 0.0 0.0)
    Transition ( 0 )
    Radius ( .3 )
    Elevation ( 0 0 0 )
    )
    )
    )

    Light (
    comment( Head light Upper Right Bright )
    Type ( 0 )
    Conditions (
    Headlight ( 3 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 1
    State (
    Duration ( 0.0 )
    LightColour ( ffffffff )
    Position ( -.25 3.12 13.24 )
    Azimuth ( 0.0 0.5 0.5)
    Transition ( 0 )
    Radius ( .3 )
    Elevation ( 0 0 0 )
    )
    )
    )

    Light (
    comment( Head light Lower right Bright )
    Type ( 0 )
    Conditions (
    Headlight ( 3 )
    Unit ( 2 )
    )
    FadeIn ( 0.5 )
    FadeOut ( 0.5 )
    Cycle ( 0 )
    States ( 4
    State (
    Duration ( 0.5 )
    LightColour ( ffffffff )
    Position ( -0.27 2.7 13.29 )
    Azimuth ( -50 -45 -40 )
    Transition ( 1 )
    Radius ( 0.3 )
    )
    State (
    Duration ( 0.5 )
    LightColour ( ffffffff )
    Position ( -0.27 2.7 13.29 )
    Azimuth ( -5 0.0 5.0)
    Transition ( 1 )
    Radius ( 0.3 )
    )
    State (
    Duration ( 0.5 )
    LightColour ( ffffffff )
    Position ( -0.27 2.7 13.29 )
    Azimuth ( 40 45 50 )
    Transition ( 1 )
    Radius ( .3 )
    )
    State (
    Duration ( 0.5 )
    LightColour ( ffffffff )
    Position ( -0.27 2.7 13.29 )
    Azimuth ( -5.0 0.0 5.0)
    Transition ( 1 )
    Radius ( 0.3 )
    )
    )
    )
    )
    )

  5. #5
    Join Date
    Jun 2009
    Location
    Oshawa ON
    Posts
    1,478

    Default

    Thank you both, Rick & Lineman. I will try substituting those files first and let you know.

    BTW, Rick, if all you need is the Eng File, I included it in my first post, the Zip file.

  6. #6
    Join Date
    Feb 2008
    Location
    Lexington, Ky
    Posts
    2,452

    Default

    No, I need it all.
    Rick

    http:\\mononrr.com

    MONON-2


  7. #7
    Join Date
    Jun 2009
    Location
    Oshawa ON
    Posts
    1,478

    Default

    OK I tried to send it to you but I cannot attach anything in a PM and it is too big for me to send in an E-Mail, even zipped.

    It is here in the F/L if you need the file. " julturbo.zip"

    Oh, and Thank You Lineman, the headlamps are now in their correct positions and glow. Thanks again.
    Last edited by Don6218; 09-05-2019 at 03:48 PM.

  8. #8
    Join Date
    Feb 2008
    Location
    Lexington, Ky
    Posts
    2,452

    Default

    The rev engine red light for the rear of the rain is off in the dirt too.

    There is a letter m in the code. Take out the letter m.

    Position ( -0.29 2.7m -13.4 )

    change both positions to

    Position ( -0.29 2.7 -13.4 )

    Also, Linemans light code is correct and right on the money, use his for the front engine.
    Last edited by Rick-MONON; 09-05-2019 at 06:56 PM.
    Rick

    http:\\mononrr.com

    MONON-2


  9. #9
    Join Date
    Jun 2009
    Location
    Oshawa ON
    Posts
    1,478

    Default

    Thank you for all your help. Help = Learning at least in my case. I have learned something new for my old brain.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •