Results 1 to 3 of 3

Thread: Starting with 50% engine brake

  1. #1

    Default Starting with 50% engine brake

    I used to know this, but which parameter would I change in the eng file to start with 50% engine braking?

  2. #2
    Join Date
    Apr 2003
    Location
    New York, USA.
    Posts
    1,856

    Default

    Hi...

    The 4th parameter on the "Brake_Train" and "Brake_Engine" specifies the percentage of brakes set at startup... So the "0.5" and the "0.75" respectively in my example below...

    Code:
    		Brake_Train ( 0 1 0.025 0.5 
    			NumNotches ( 5 
    				Notch ( 0 0 TrainBrakesControllerReleaseStart ) 
    				Notch ( 0.2 0 TrainBrakesControllerRunningStart ) 
    				Notch ( 0.3 0 TrainBrakesControllerSelfLapStart ) 
    				Notch ( 0.4 1 TrainBrakesControllerApplyStart ) 
    				Notch ( 1 0 TrainBrakesControllerEmergencyStart ) 
    			) 
    		) 
    		Brake_Engine ( 0 1 0.005 0.75
    			NumNotches ( 5
    				Notch( 0.0 0 TrainBrakesControllerFullQuickReleaseStart )
    				Notch( 0.25 0 TrainBrakesControllerRunningStart )
    				Notch( 0.50 0 TrainBrakesControllerHoldStart )
    				Notch( 0.75 0 TrainBrakesControllerFullServiceStart )
    				Notch( 1.0 0 TrainBrakesControllerEmergencyStart )
    			)
    		)
    Regards,
    Scott

  3. #3

    Default

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •