Results 1 to 2 of 2

Thread: Problem with Cajon Pass 4.2 Activity Pack 1 - Activity UP QMJWC05

  1. #1
    Join Date
    Dec 2017
    Location
    Neusaess, Germany
    Posts
    21

    Default Problem with Cajon Pass 4.2 Activity Pack 1 - Activity UP QMJWC05

    Activity UP QMJWC05 - Merchandise train from Mojave to West Colton Yard

    I have the following problem in playing this activity:
    Shorly before the green signal at MP 450.1 (Phelan Setout) there's always a coupler break between the locos no. 2 and 3.
    Speed limit on the route from Palmdale is constantly at 60, I never have exceeded 50. In the meantime I've also adjusted the settings in all three eng.-files:

    Coupling (
    Type ( Automatic )
    Spring (
    Stiffness ( 9.8e6N/m 9.8e6N/m )
    Damping ( 5e6N/m/s 5e6N/m/s )
    Break ( 8.1e7N 8.1e7N )
    r0 ( 0cm 2cm )
    )
    CouplingHasRigidConnection ( 1 )
    Velocity ( 0.2m/s )
    )
    Coupling (
    Type ( Automatic )
    Spring (
    Stiffness ( 9.8e6N/m 9.8e6N/m )
    Damping ( 5e6N/m/s 5e6N/m/s )
    Break ( 8.1e7N 8.1e7N )
    r0 ( 0cm 2cm )
    )
    Comment ( CouplingHasRigidConnection ( 1 ) )
    Velocity ( -0.2m/s )
    )
    Buffers (
    Spring (
    Stiffness ( 9.8e6N/m 9.8e6N/m )
    Damping ( 5e6N/m/s 5e6N/m/s )
    r0 ( 0m 1e9 )
    )

    Still too less?
    I've also tried to pass the section with a speed below 10.

    But nothing helps.

    Seems a little bit to me as the old MSTS coupler problem, like in the original version of Maria's Pass when entering Cutbank.

    Can anyone help?

    Many thanks and best wishes,
    Martin

  2. #2
    Join Date
    Jan 2011
    Location
    New York
    Posts
    317

    Default

    I would seriously advise you to upgrade to Open Rails. It is so much more superior in every way and you dont have these "bugs" plaguing your life. Also,a lot,if not all new content being developed commercially and freely will only be Open Rails compatible.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •