Results 1 to 4 of 4

Thread: rotate objects SHAPE FILE MANAGER

  1. #1
    Join Date
    Feb 2005
    Location
    belo horizonte, minas gerais, brasil
    Posts
    391

    Default rotate objects SHAPE FILE MANAGER

    Hello people !!
    I have been using some techniques I learned with SFM24 and joining with other OPEN RAILS techniques and thus managed to make new loads for wagons.
    having the texture (see image) I would like to invert the position of these or just one, to compose a flat wagon here called wire rod.
    the most I could do was to put one of them upright.
    the idea is that it should be in the lateral position on the rail / wagon.

    Chimbica Dash8

  2. #2
    Join Date
    Apr 2003
    Location
    New York, USA.
    Posts
    1,965

    Default

    Hi...

    SFM_2.5 on Elvas I believe has the feature to rotate objects at 90 degree increments.

    Regards,
    Scott

  3. #3
    Join Date
    Feb 2005
    Location
    belo horizonte, minas gerais, brasil
    Posts
    391

    Default

    Quote Originally Posted by scottb613 View Post
    Hi...

    SFM_2.5 on Elvas I believe has the feature to rotate objects at 90 degree increments.

    Regards,
    Scott
    I appreciate the tip.
    I'll check
    Chimbica Dash8

  4. #4
    Join Date
    Feb 2005
    Location
    belo horizonte, minas gerais, brasil
    Posts
    391

    Default

    shape of a single ACE, but with # 9 directories.
    I managed to rotate 90 degrees (thanks to scottb for the tip).
    the three of the image remain, to which I cannot exclude two of them.

    I ACCEPT TO RECEIVE A STEEL WIRE COIL TO MAKE AN UNPRECEDENTED LOAD.

    A hug,
    Anderson Chimbica
    Chimbica Dash8

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •