Results 1 to 10 of 42

Thread: DARv3 FIX Files

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2006
    Location
    Brockville, ON, CA
    Posts
    2,655

    Default DARv3 FIX Files

    Unzip attachment. Replace the two activity files, and add the one consist file to the consist folder in you Trains folder.

    DARv3_FIX.zip

    Please and thank you!

    Paul :-)

  2. #2
    Join Date
    Jul 2004
    Location
    Wareham, Dorset, U.K.
    Posts
    2,775

    Default

    V3 Downloaded and unzipped but where is the stock? There's no mention of it, unless I'm being REALLY thick, and it's obvious from the Work orders there ought to be a whole heap of stuff. A search of the file library "DAR" only brings up 3 files and none of those are recent.

    BTW Paul any links to reference sites for the DAR because the picture libraries don't yield much. As far as I can see they had a couple of S3's replaced by SW1200RS's and a couple of RDC's. Did they have their own freight stock?
    Geoff
    Dorset - near The Swanage Railway.
    UK

  3. #3
    Join Date
    May 2010
    Location
    MIdland Texas
    Posts
    45

    Default

    Look in the DARv3 ACTIVITIES Folder, file name is: RequiredRollingStockv3.txt

  4. #4
    Join Date
    Dec 2006
    Location
    Brockville, ON, CA
    Posts
    2,655

    Default

    Aside from a few cabeese back before WW II and some passenger cars lettered for the DAR until the end of steam, all other "home" cars were Canadian Pacific.

    Look at the Required Rolling Stock test file in the Activities folder as LLaning08 suggests.

    Paul :-)

  5. #5
    Join Date
    Jul 2004
    Location
    Wareham, Dorset, U.K.
    Posts
    2,775

    Default

    Thanks Lawrence, thanks Paul. Hidden in plain sight!

    I figured it must be there. Perhaps a separate "Documents" or "Required Stock" folder would be useful as there is a lot of provided info in txt files?
    Geoff
    Dorset - near The Swanage Railway.
    UK

  6. #6
    Join Date
    Dec 2006
    Location
    Brockville, ON, CA
    Posts
    2,655

    Default

    This is from the top of the Readme file....

    DARv3 A Route for Microsoft Train Simulator and Open Rails.
    Copyright 2020 Paul Charland. All Rights Reserved.

    LICENSE AGREEMENT

    1. This software is distributed AS-IS.
    2. In no event shall Paul Charland (The Author) be liable for any damages
    whatsoever arising out of the use of or inability to use this route,
    even if the author has been advised of the possibility of such damages.
    3. You will not use this route for any financial gain.
    4. You understand that the route contains the copyrighted work of other
    authors and these copyrighted works may not be used outside of this
    route without first obtaining the written consent (if applicable) of the
    author to whom the work belongs.

    REQUIRED ADD-ON'S

    This route requires the latest version of xtracks and newroads to be installed. The route was built using MSTS bin 1.7.x. There is a list of required rolling stock in the Activities folder along with four Route Maps you can print out.

  7. #7
    Join Date
    Jan 2008
    Location
    Berlin/Germany
    Posts
    437

    Default

    Hi Paul,

    I noticed that "cp_mw.zip" is missing from the list of required rolling stock.

    Uli

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •