Results 1 to 3 of 3

Thread: Anybody else use Paint Dot Net

  1. #1
    Join Date
    Nov 2007
    Location
    SW MO
    Posts
    333

    Default Anybody else use Paint Dot Net

    I started a little project back in March that needed some custom items.
    I started with Sketchup and got so far as to get the roof peak right.
    Then I rediscovered Paint Dot Net and started retexturing things from my hard drive.

    Here's one of the depots,

    Before from the MILW
    Lombard.JPG

    After,
    FFX.jpg

    And because the route had signals, they needed redone.

    Before from the L&HR 1940
    ouqto.JPG

    After
    LQTO.JPG

    I just getting started. This is a lot of fun.

    Show 'em if you got 'em.

    Randy

  2. #2
    Join Date
    Jun 2013
    Location
    Minnesota
    Posts
    1,413

    Default

    I haven't retextured much of anything, really, but paint.NET is my texturing go-to, and it does about anything I would ever need of it. I'm still learning new tricks in it. The noise tool, for one, is pretty useful

  3. #3
    Join Date
    Nov 2007
    Location
    SW MO
    Posts
    333

    Default

    A couple more.

    From Weymouth on the DAR3,
    wmouth2.JPG

    To Troy on the Rock Island Lines,
    Open Rails 2020-07-02 07-57-05.jpg

    I also redid Hank's semaphores that came with the L&HR 1940 route,
    ohsuq.JPG Sema.JPG
    I did these before Travis released his excellent set of semaphores. I'll use both.

    Troy Jct.
    Open Rails 2020-07-20 01-59-37.jpg
    The tower, track, cars, signals and signs have all been redone
    Lots of good images to use on the net. And the snipping tool makes it so easy.

    That's all for now,
    Randy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •