DRGW Green River Route: "Fruita Turn" Problems

[MaineRailfan228]

I've been having issues with the Green river route activity "Fruita Turn". When starting the activity everything seems fine but after a while I come to a red signal that is red both ways, and the AI train which is the first you encounter can't proceed. I tried using manual mode to fix it, but it didn't work. Any help would be appreciated, Thanks.

[derekmorton]

If the player train starts on the left hand track, it works ok.

[ragtimer]

Check the path of both trains,I have known the supplied activities to have incorrect pathe.

[MaineRailfan228]

So when I start this activity I start on the most far right side track, which is the track that goes all the way to the red signal. And for checking the paths, I don't know how to do so. But I still appreciate the help.

[ragtimer]

Use the MSTS activity manager

[slipperman]

Hi Peter,
This is an Open Rails Forum.
There's a pretty good chance that posters don't have, or are not able to run, the MSTS Editors!

Cheers,
Ged

[geepster775]

The activity usually should run provided you have the same open rails options selected for any of Trinsimulations later routes built for open rails only. those later routes come with a documentation pdf that shows the required settings.

As for this activity, the player should take the siding at Durham for a meet and then proceed to fruita and work the industry off the main with ai traffic running by you via the siding

[MaineRailfan228]

If you are referring to the MSTS editor and tools. I am not able to access that program due to it not running correctly on my build of windows 10.

[MaineRailfan228]

Also I'm referring to the point at when you start near West Grand Junction and that switch with the signal aspect facing the player which is showing a approach aspect. While the signal facing the AI train is showing a stop aspect.

[R. Steele]

This may help, make an OpenRails folder in the greenriver route directory, place a copy of the sigcfg.dat file in it. Also make sure all the "SignalNumClearAhead" entries are 4 or larger. This activity works okay for me.

bandicam 2021-01-22 09-38-17-415.jpg

bandicam 2021-01-22 09-38-30-762.jpg

bandicam 2021-01-22 09-39-13-711.jpg

By searching the manual for "OpenRails folder" you can find other uses for this folder...like removing trees from tracks.