Results 1 to 4 of 4

Thread: Integrating Routes

  1. #1

    Default Integrating Routes

    How can I integrate two routes into one route?

  2. #2
    Join Date
    May 2010
    Location
    S.W.WALES
    Posts
    4,013

    Default

    If you mean merge two routes, then only a few people know how to do it.

    I am not one of them. From what i have read, it is possible not only too merge two routes with the same starting coordinates.

    But one or two boys, have managed to merge two routes, without matching start positions.

    Problem is no-one with the ability to merge routes. Is very keen on sharing the info.
    Yma O Hyd

  3. #3

    Default

    This link might help. I found it a few years ago but never messed with it. My intention is to merge Tennessee Pass with the Raton route. I'm building off the Tennessee Pass route from Minturn up to Dotsero, adding the Moffat line to Glenwood Springs and Joint line down to Pueblo, and running from Pueblo to La Junta for the Santa Fe, and the D&RGW and old C&S line down to Walsenburg. Then extend the D&RGW to La Veta, and the C&S/BN/D&RGW line down to Trinidad (thus the Raton merge). A whole lot of route be sure.http://www.mcs-software.it/rs/MergeRoute_en/index.htm

  4. #4
    Join Date
    May 2010
    Location
    S.W.WALES
    Posts
    4,013

    Default

    Yeah that guide has been around for years, buddy. Bit too much messing about for my liking sorry.
    Yma O Hyd

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •